Objective of stenter A machine or apparatus for stretching or stentering fabrics. The purpose of the stenter machine is to bringing the length and width to pre determine dimensions and also for heat setting and it is used for applying finishing chemicals and also shade variation is adjusted.
In particular, flat woven fabrics such as cotton, hemp, chemical fiber, and blended fabrics need to be equipped with a series of devices in each section such as cloth feeding, cloth discharging, and cloth walking to complete the process. We usually talk about the tenter setting machine, and we know that it is a device specially used for tentering and heat setting.
However, it also has a feature that the tenter setting machine can generate a large amount of positive and negative charges. The charge can neutralize the charge on the object. If the surface of the object has a negative charge, it can attract a positive charge in the gas stream, and conversely attract a negative charge in the gas stream to neutralize its own positive charge.
In this way, no matter what kind of charge the object itself has, it can be neutralized, eliminating static electricity. It can be called a fixed special device for static elimination, which is easy to operate and stable in terms of installation. However, it is still necessary to introduce its main role. The so-called setting machine is to complete the shaping process of the fabric.
Usually, the air in the setting machine is heated by the heat-conducting oil to achieve the purpose of heating the fabric. After the temperature reaches a certain time, the structural change of the fabric is promoted, thereby Shaped as a predetermined target. Now with the continuous updating of technology, the stenter has been equipped with a monitoring system. Synthetic fiber has strong wear resistance.
When it is used for deuterated metal mesh, it has increased its service life by five times, and the economic benefits are greatly increased. In the process, more different patterns can be woven. There is also a proprietary design based on the unique properties of hot wind dynamics, which helps to maintain a uniform balance of the temperature distribution. This ensures that the fabric with higher moisture content is still malleable when it is shaped by the stenter. When it is dry, the warp and weft yarns can be properly adjusted in the fabric, and the fabric door is pulled to a predetermined size.